TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 204 of 779
Fig. 5-51 Fig. 5-42 Fig. 5-48 Remove Install 1. Remove 18 nuts (A) and lock washers attaching 1. Install six new intake manifold tube gaskets (B) on intake tubes to cylinders. Remove manifold, manifold studs. heater, and turbosupercharger air outlet elbow as a 2. Position manifold, manifold heater, and tur- unit. bosupercharger air outlet elbow as. a unit on cylinder 2. Remove and discard six intake manifold tube gaskets (B). studs. Install 18 nuts (A) and lock washers securing intake tubes to cylinders. Note. The right and left intake manifolds are removed or installed in the same manner. Figure 5-33. Removing or installing right intake manifold. 5-7. Fuel Filters, Throttle Linkage, Front Refer to Table 5-4 for illustrations and and Rear Shrouds, and Oil Filler and disassembly instructions. Figure references are Indicator Tubes listed in the table. Table 5-4. Fuel Filters, Throttle Linkage, Front and Rear Shrouds, and Oil Filler and Indicator Tubes 5-18