TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 187 of 779
CHAPTER 5 DISASSEMBLY OF ENGINE Section I. PREPARATION OF ENGINE FOR DISASSEMBLY 5-1. General must be thoroughly drained, cleaned, and This section covers the preparation of the stripped of external accessories before engine for disassembly. Refer to the pertinent proceeding with disassembly. Refer to Table 5-1 TM’s covering the removal of powerplant from for illustrations and instructions required for the vehicle and separation of the transmission draining engine oil and removing accessories. from the engine. Prior to disassembly, engines Table 5-1. Draining Engine Oil and Removing Engine Accessories Engine and Sling Oil Pan Drain Plugs Fuel Pump Starter Time Totalizing Meter Generator and Associated Parts Turbosupercharger and Lower Shroud Plates 5-1 5-2, 5-3 4-1 through 4-3 4-4 through 4-8 5-4, 5-5 4-11 through 4-16 4-20 through 4-33 5-2. Drain Engine Oil The engine oil must be drained from the engine before engine is disassembled. Lift engine using multiple leg sling -4910-919-2884 (fig. 5- 1) and place engine on suitable blocks. Drain engine oil following instructions that accompany figures 5-2 and 5-3. Figure 5-1. Lifting engine using multiple leg sling-4910-919-2884. 5-1