TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 144 of 779
Remove Install Remove oil pan sealing thread and clean oil pan mating Apply a thin coat of gasket cement, Specification MIL-C- surfaces thoroughly. 10523 (ORD), on the oil pan flange and install sealing thread. Figure 4-125. Removing or installing oil pan sealing thread. Section VIl. REPLACEMENT OF VALVE ROCKER ARMS, ROCKER ARMSHAFTS, AND VALVE CLEARANCE ADJUSTING SCREWS 4-14. General structions on removal and installation This section contains instructions for the procedures. Figure references are listed under replacement of valve rocker arms, rocker arm appropriate headings in the table. Instructions shafts and valve clearance adjusting screws. apply to either left or right side of the engine. Refer to Table 4-6 for illustrations and in- Table 4-6. Valve Rocker Arms, Rocker Arm Shafts and Valve Clearance Adjusting Screws 4-62