TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 143 of 779
Figure 4-123 Remove Support oil pan adequately before removing 1. Cut locking wire and remove 12 drilled head bolts (A) remaining two nuts and washers then remove oil and flat washers attaching the oil pan to crankshaft damper and oil filter housing. pan. 2. Remove 27 of the 28 self-locking nuts (B) and flat Install washers attaching oil pan to each side of the crankcase 1. Install 28 self-locking nuts (B) and flat washers assembly. securing oil pan to each aide of the crankcase assembly. Note. One nut and washer are left installed on 2. Install 12 drilled head bolts (A) and flat washers securing oil pan to crankshaft damper and oil filter each side of the oil pan, near the center, to housing. prevent oil pan from falling and being damaged. Figure 4-124. Removing or installing engine oilpan. 4-61