NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 973 of 1014
NMWR 9-2815-220 INDEX OF OVERHAUL INSPECTION PROCEDURES (OIPs) 0055 00 GENERAL Table 1. List of OIPs. PART NUMBER NOMENCLATURE WP 10863598 Angle bracket 0043 00 10863598 Angle bracket 0043 00 10865001 Starter support angle bracket 0031 00 10865022 Flywheel end left bank cylinder head oil drain metal tube assembly (Models 0029 00 AVDS-1790-2DA and AVDS-1790-2DR) 10865180 Damper end right bank cylinder head oil drain cylinder metal tube assembly 0029 00 10865183 Crank pin bearing oil plug 0008 00 10865247 Intermediate right bank mounting plate 0025 00 10865283 Left and right bank intercylinder sleeve engine camshaft flange 0016 00 10865322 Governor cross shaft control lever 0024 00 10865361 Bevel gearshaft accessory camshaft support 0018 00 10865382 Accessory cam drive bevel gearshaft retaining plug 0018 00 10865383 Accessory cam drive bevel gearshaft 0018 00 10882610 Engine accessory bracket (Models AVDS-1790-2CA and AVDS-1790-2DA) 0008 00 10882611 Fuel pump adapter and flange (Models AVDS-1790-2CA and AVDS-1790-2DA) 0015 00 10882613 Fuel pump drive spur gear (Models AVDS-1790-2CA and AVDS-1790-2DA) 0008 00 10882766 Check valve damper housing mounting bracket (Models AVDS-1790-2CA and 0032 00 AVDS-1790-2DA) 10882773 Generator adapter (Models AVDS-1790-2DA and AVDS-1790-2DR) 0009 00 10882890 Crankcase breather metallic bent tube 0039 00 10883083 Right bank oil pan drain metal tube assembly 0029 00 10883748 Generator air intake hose elbow (Model AVDS-1790-2DA) 0038 00 10884033 Generator air intake tube to crankcase angle bracket 0038 00 10884034 Generator air intake tube to crankcase angle bracket 0038 00 10884037 Air intake generator tube assembly 0038 00 10889712 Injection advance vane housing cover 0019 00 10898756 Right bank exhaust manifold shroud 0025 00 10898777 Starter driven drive idler spur gear 0010 00 0055 00-1 Change 1 Table 1 lists overhaul inspection procedures numerically and their location by work package number. The procedures are located in the overhaul portion of the NMWR applicable to the subject item.