NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 971 of 1014
NMWR 9-2815-220 0054 00-17/-18 blank FABRICATED TOOLS AND EQUIPMENT—Continued 0054 00 COUPLING PULLER 1. The coupling puller is used for removing the drive shaft half and/or the injection pump half of the fuel injection pump flexible coupling. Refer to TM 9-2815-220-34. 1.8125 0.625 MATERIAL 4-1/2 X 1 X 1 CARBON TOOL STEEL ONE ½-13UNC-2A X 2. HEX-HD CAP SCREW TWO 5/16-13UNF-2A X 2-1/2 HEX-HD CAP SCREW 1.000 0.875 1.625 4.500 DRILL TWO 0.375 DIA HOLES THRU 0.500 1.000 0.125 DRILL AND TAP THRU ONE HOLE 1 2-13 UNC-2A 0.625 NOTE: ALL DIMENSION SHOWN ARE IN INCHES Figure 10. Coupling Puller. END OF WORK PACKAGE