NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 771 of 1014
NMWR 9-2815-220 ENGINE WIRING HARNESS BRACKETS, STRAPS, AND ASSOCIATED PARTS 0043 00 OVERHAUL—Continued Table 1. Components Requiring Overhaul Inspection. COMPONENT OIP Mounting bracket, (item 7, Figure 9) 12354382 and 12354383 (Table 2) Mounting bracket, (item 13, Figure 9) 11673851 (Table 3) Mounting bracket, (item 16, Figure 9) 11673852 (Table 4) Engine accessory bracket, (item 30, Figure 9) 11673853 (Table 5) Mounting bracket, (item 11, Figure 10) 12254374 (Table 6) Angle bracket, (item 14, Figure 10) 10863598 (Table 7) Mounting bracket, (item 27, Figure 10) 11673854 (Table 8) Mounting bracket, (item 33, Figure 10) 11673855 (Table 9) Angle bracket, (item 6, Figure 11) 10863598 (Table 10) Engine accessory bracket, (item 4, Figure 12) 11671981 (Table 11) 0043 00-3 Change 1 RECLAMATION When necessary, the power pack harness bracket P/N 11682725 for the 1790-2D engine can be converted to the bracket P/N 11673848 for the 1790-2C. Use the procedures outlined below to perform the conversion. Refer to Figure 1. a. Using a drill press or milling machine enlarge 1.438 diameter hole in bracket P/N 11682725 to 2.310 inch – 2.330 inch diameter. b. Drill four (4) new holes to .209 inch - .219 inch diameter. c. Machine all holes to requirements of drawing 11673848.