NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 729 of 1014
NMWR 9-2815-220 BREATHER TUBES AND FIRE EXTINGUISHER TUBE OVERHAUL 0039 00 THIS WORK PACKAGE COVERS: General Instruction, Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Materials/Parts Materials/Parts – Continued Air duct hose (1) (item 38, WP 0052 00) Machine bolt (1) (item 773, WP 0052 00) Air duct hose (1) (item 39, WP 0052 00) Machine screw (1) (item 672, WP 0052 00) Air duct hose (2) (item 37, WP 0052 00) Nut (1) (item 469, WP 0052 00) Breather tube (1) (item 56, WP 0052 00) Pipe bushing (1) (item 826, WP 0052 00) Cap screw (2) (item 783, WP 0052 00) Self-locking nut (1) (item 583, WP 0052 00) Elbow (1) (item 574, WP 0052 00) Self-locking nut (3) (item 585, WP 0052 00) Elbow (2) (item 730, WP 0052 00) Tube assembly (1) (item 436, WP 0052 00) Gasket (1) (item 366, WP 0052 00) Washer (1) (item 804, WP 0052 00) Gasket (2) (item 371, WP 0052 00) Hose clamp (8) (item 3, WP 0052 00) Tools Hose assembly (1) (item 763, WP 0052 00) Tool kit, general mechanic's: automotive Hose assembly (1) (item 764, WP 0052 00) (item 30, WP 0051 00) Lockwasher, (1) (item 688, WP 0052 00) Lockwasher (2) (item 695, WP 0052 00) References Loop clamp (1) (item 14, WP 0052 00) TM 9-2815-220-34 Loop clamp (2) (item 331, WP 0052 00) WP 0005 00 Loop clamp (1) (item 618, WP 0052 00) Loop clamp (1) (item 620, WP 0052 00) GENERAL INSTRUCTION 1. This section covers overhaul of the breather tubes and fire extinguisher tube. Specific instructions on disassembly, cleaning, inspection, repair, and assembly are included. Wear limits, fits, tolerances, and overhaul inspection procedures (OIPs) for individual components are also included. Mandatory replacement parts are designated by an asterisk (*) in the key to Figures 1 and 2. DISASSEMBLY 1. Disassemble breather tubes and fire extinguisher tube in accordance with TM 9-2815-220-34. CLEANING 1. Refer to WP 0005 00 for general cleaning instructions. 0039 00-1