NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 571 of 1014
NMWR 9-2815-220 INDUCTION HEATER SYSTEM OVERHAUL 0027 00 THIS WORK PACKAGE COVERS: General Instruction, Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Materials/Parts Materials/Parts - Continued Compound, cleaning (item 1, WP 0050 00) Self-locking nut (10) (item 583, WP 0052 00) Rag, wiping (item 9, WP 0050 00) Self-locking nut (8) (item 585, WP 0052 00) Assembled washer bolt (4) (item 272, WP 0052 00) Self-locking nut (2) (item 588, WP 0052 00) Assembled washer bolt (3) (item 336, WP 0052 00) Solenoid valve (1) (item 820, WP 0052 00) Cap screw (2) (item 473, WP 0052 00) Spark plug (2) (item 514, WP 0052 00) Cap screw (2) (item 474, WP 0052 00) Tube assembly (1) (item 7, WP 0052 00) Cap screw (4) (item 482, WP 0052 00) Tube assembly (1) (item 25, WP 0052 00) Check valve (1) (item 169, WP 0052 00) Tube assembly (1) (item 108, WP 0052 00) Fluid filter (1) (item 168, WP 0052 00) Tube assembly (1) (item 140, WP 0052 00) Gasket (2) (item 363, WP 0052 00) Tube assembly (1) (item 186, WP 0052 00) Grommet (1) (item 703, WP 0052 00) Tube clinch sleeve (4) (item 739, WP 0052 00) Hose assembly (1) (item 752, WP 0052 00) Tube coupling nut (2) (item 737, WP 0052 00) Lead and conduit assembly (2) (item 308, Tube fitting insert (2) (item 70, WP 0052 00) WP 0052 00) Tube fitting insert (2) (item 112, WP 0052 00) Lockwasher (2) (item 685, WP 0052 00) Tubing (1) (item 304, WP 0052 00) Loop clamp (4) (item 11, WP 0052 00) Tubing (V) (item 305, WP 0052 00) Loop clamp (2) (item 599, WP 0052 00) Washer (8) (item 640, WP 0052 00) Loop clamp (2) (item 602, WP 0052 00 Washer (2) (item 795, WP 0052 00) Loop clamp (1) (item 609, WP 0052 00) Washer (4) (item 802, WP 0052 00) Loop clamp (10) (item 617, WP 0052 00) Loop clamp (10) (item 622, WP 0052 00) Tools Loop clamp (2) (item 623, WP 0052 00) Tool kit, general mechanic's: automotive Machine screw (10) (item 672, WP 0052 00) (item 30, WP 0051 00) Nozzle assembly (2) (item 204, WP 0052 00) Pipe bushing (2) (item 544, WP 0052 00) References Pipe bushing (1) (item 731, WP 0052 00) TM 9-2815-220-34 Pipe elbow (1) (item 275, WP 0052 00) WP 0005 00 Pipe tee (1) (item 14, WP 0052 00) Pipe to tube elbow (2) (item 732, WP 0052 00) 0027 00-1 Change 1 GENERAL INSTRUCTION This section covers overhaul of the induction heater system. Specific instructions on disassembly, cleaning, inspection, repair, and assembly are included. Wear limits, fits, tolerances, and overhaul inspection procedures (OIP’s) for individual components are also included. Mandatory replacement parts are designated by an asterisk (*) in the key to Figures 1 and 2. DISASSEMBLY Disassemble induction heater system in accordance with TM 9-2815-220-34.