NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 537 of 1014
NMWR 9-2815-220 INTAKE MANIFOLDS, CONNECTING TUBES, TURBOSUPERCHARGER SUPPORT, 0026 00 AND ASSOCIATED PARTS OVERHAUL THIS WORK PACKAGE COVERS: General Instruction, Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Materials/Parts Materials/Parts – Continued Cap screw (2) (item 487, WP 0052 00) Ring spacer (4) (item 377, WP 0052 00) Cap screw (8) (item 496, WP 0052 00) Ring spacer (4) (item 379, WP 0052 00) Cap screw (2) (item 503, WP 0052 00) Self-locking nut (76) (item 585, WP 0052 00) Cap screw (8) (item 681, WP 0052 00) Self-locking nut (4) (item 592, WP 0052 00) Cap screw (10) (item 780, WP 0052 00) Self-locking nut (8) (item 525, WP 0052 00) Close tolerance bolt (2) (item 450, WP 0052 00) Spring tension washer (4) (item 298, WP 0052 00) Cotter pin (2) (item 633, WP 0052 00) Spring tension washer (4) (item 378, WP 0052 00) Gasket (4) (item 289, WP 0052 00) Stud (4) (item 372, WP 0052 00) Gasket (2) (item 318, WP 0052 00) Tie-rod clamp seat (2) (item 368, WP 0052 00) Gasket (2) (item 370, WP 0052 00) Washer (8) (item 349, WP 0052 00) Gasket (2) (item 373, WP 0052 00) Washer (2) (item 642, WP 0052 00) Gasket (12) (item 374, WP 0052 00) Washer (8) (item 797, WP 0052 00) Grommet (2) (item 462, WP 0052 00) Washer (12) (item 804, WP 0052 00) Hose (2) (item 431, WP 0052 00) Washer (4) (item 466, WP 0052 00) Hose clamp (4) (item 325, WP 0052 00) Lockwasher (36) (item 695, WP 0052 00) Tools Lockwasher (10) (item 696, WP 0052 00) Tool kit, general mechanic's: automotive Nut (2) (item 714, WP 0052 00) (item 30, WP 0051 00) Nut (36) (item 748, WP 0052 00) Caliper, inside 2” to 8” (item 3, WP 0051 00) O-ring (4) (item 537, WP 0052 00) Caliper, dial (item 6, WP 0051 00) Packing retainer (4) (item 50, WP 0052 00) Preformed packing (4) (item 542, WP 0052 00) References TM 9-2815-220-34 WP 0005 00 GENERAL INSTRUCTION 1. This section covers overhaul of the intake manifolds, connecting tubes, turbosupercharger support, and associated parts. Specific instructions on disassembly, cleaning, inspection, repair, and assembly are included. Wear limits, fits, tolerances, and overhaul inspection procedures (OIPs) for individual components are also included. Stud identification information is included with the repair instructions. Mandatory replacement parts are designated by an asterisk (*) in the key to Figures 2 and 3. DISASSEMBLY 1. Disassemble intake manifolds, connecting tubes, turbosupercharger support, and associated parts in accordance with TM 9-2815-220-34. 0026 00-1