NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download

Page 46 of 1014

NMWR 9-2815-220 EQUIPMENT DESCRIPTION AND DATA—Continued 0002 00 EQUIPMENT DATA - CONTINUED 2. Overhaul Data Plates. Overhaul data plates (Figure 21) will be stamped as necessary to maintain an up-to- date record of overhaul. Stamping or marking data plates shall be accomplished in accordance with TB ORD 1030. NOTE Data plates must be removed before stamping. New plates are prohibited, except as explained below. a. Replacement. When sufficient space is not available on the existing plate to add information, the plate shall be replaced and all pertinent data transferred to the new plate. Data shall not be stamped directly on any part, assembly, or item of equipment. b. Location. An overhaul data plate will be affixed adjacent to the manufacturer’s equipment identification plate when overhaul is accomplished at a depot or other facility. NOTE Do not remove the manufacturer’s equipment identification plate. It must always be available to record the original configuration of the equipment prior to any modification. Figure 21. Typical Engine Overhaul Data Plate. 0002 00-24 Change 1