NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 447 of 1014
NMWR 9-2815-220 THROTTLE CONTROL AND ASSOCIATED PARTS OVERHAUL 0024 00 THIS WORK PACKAGE COVERS: General Instruction, Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Materials/Parts Assembled washer screw (2) (item 268, WP 0052 00) Materials/Parts - Continued Ball bearing (9) (item 359, WP 0052 00) Self-locking nut (3) (item 585, WP 0052 00) Bearing (1) (item 376, WP 0052 00) Self-locking nut (4) (item 589, WP 0052 00) Bearing (1) (item 519, WP 0052 00) Seal (1) (item 48, WP 0052 00) Bearing shield (2) (item 129, WP 0052 00) Seal (1) (item 261, WP 0052 00) Cap screw (2) (item 472, WP 0052 00) Seal (2) (item 333, WP 0052 00) Cap screw (3) (item 483, WP 0052 00) Sleeve bearing (2) (item 567, WP 0052 00) Cap screw (4) (item 775, WP 0052 00) Solenoid housing (1) (item 236, WP 0052 00) Cotter pin (2) (item 442, WP 0052 00) Spring (1) (item 239, WP 0052 00) Gasket (1) (item 45, WP 0052 00) Spring pin (1) (item 566, WP 0052 00) Gasket (1) (item 47, WP 0052 00) Washer (4) (item 259, WP 0052 00) Lockwasher (5) (item 694, WP 0052 00) Washer (3) (item 464, WP 0052 00) Lockwasher (8) (item 695, WP 0052 00) Washer (2) (item 799, WP 0052 00) Machine bolt (2) (item 768, WP 0052 00) Washer (2) (item 801, WP 0052 00) Machine bolt (5) (item 807, WP 0052 00) Washer (2) (item 804, WP 0052 00) Machine screw (1) (item 10, WP 0052 00) Woodruff key (3) (item 716, WP 0052 00) Machine screw (1) (item 741, WP 0052 00) Needle roller bearing (2) (item 565, WP 0052 00) Tools Nut (7) (item 710, WP 0052 00) Tool kit, general mechanic's: automotive Pin (1) (item 46, WP 0052 00) (item 30, WP 0051 00) Pin (1) (item 549, WP 0052 00) Caliper, micrometer, inside Pin (4) (item 550, WP 0052 00) (item 4, WP 0051 00) Pin (1) (item 800, WP 0052 00) Caliper set, micrometer, outside Retainer (1) (item 237, WP 0052 00) (item 5, WP 0051 00) Retaining ring (12) (item 551, WP 0052 00) Multimeter (item 23, WP 0051 00) Retaining ring (8) (item 556, WP 0052 00) Retaining ring (2) (item 563, WP 0052 00) References Right connecting link (1) (item 190, WP 0052 00) TM 9-2815-220-34 Right connecting link (1) (item 238, WP 0052 00) WP 0005 00 Spring (1) (item 113, WP 0052 00) Spring (2) (item 208, WP 0052 00) 0024 00-1 Change 1 GENERAL INSTRUCTION This section covers overhaul of the throttle control and associated parts. Specific instructions on disassembly, cleaning, inspection, repair, and assembly are included. Wear limits, fits, tolerances, and overhaul inspection procedures (OIP’s) for individual components are also included. Mandatory replacement parts are designated by an asterisk (*) in the key to Figure 1. DISASSEMBLY Disassemble throttle control and associated parts in accordance with TM 9-2815-220-34. CLEANING Refer to WP 0005 00 for general cleaning instructions.