NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 410 of 1014
NMWR 9-2815-220 OIL COOLER SCREENS AND ASSOCIATED PARTS OVERHAUL—Continued 0021 00 INSPECTION 1. Inspect components not covered by an OIP in accordance with WP 0005 00. 2. Refer to NMWR 9-2815-162 for specific inspection instructions of the oil coolers. 3. Refer to WP 0005 00 and the OIPs in Table 1 for specific inspection criteria for selected items. 4. Discard all mandatory replacement parts. Refer to Figure 3. Table 1. Components Requiring Overhaul Inspection. COMPONENT OIP Left bank transmission oil cooler screen mounting 11684082-2 (Table 3) bracket (item 5, Figure 3) Engine oil cooler fluid straight adapter (item 13, Figure 3) 12254380* (Table 4) Damper end right bank engine accessory bracket 11684050 (Table 5) (item 17, Figure 3) Center left and right bank engine accessory bracket 11684051 (Table 6) (item 18, Figure 3) Right bank transmission oil cooler screen mounting 11684082-1 (Table 7) bracket (item 19, Figure 3) Engine oil cooler pump fluid connector (item 20, 11683952 (Table 8) Figure 3) Damper end left bank oil cooler bracket (item 22, 11684049 (Table 9) Figure 3) * Model AVDS-1790-2CA and AVDS-1790-2DA REPAIR 1. Refer to WP 0005 00 for general repair instructions. 2. Refer to NMWR 9-2815-162 for specific repair instructions of the oil coolers. ASSEMBLY 1. Refer to WP 0005 00 for general assembly procedures. 2. Assemble oil cooler screens and associated parts in accordance with TM 9-2815-220-34. 0021 00-2