NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 391 of 1014
NMWR 9-2815-220 AUTOMATIC INJECTION ADVANCE ASSEMBLY OVERHAUL—Continued 0019 00 Table 12. Overhaul Inspection Procedure for Fluid Regulating Valve (OIP 8682731) (Item 26, Figure 6). QA NO. REF. CHARACTERISTIC INSP. REQUISITE REQ. LTR. METHOD 1 Cracks Dye penetrant None allowed 2 Scratches, nicks, Visual None allowed gouges, or raised metal on contact surfaces 3 A Slot width Measure 0.2510 – 0.2550 in. (6.3754 – 6.4770 mm) 4 B Inside diameter Measure 1.5015 – 1.5020 in. (38.1381 – 38.1508 mm) 5 C Outside diameter Measure 1.8710 – 1.8715 in. (3 places) (47.5234 – 47.5361 mm) 6 Fit of fluid regulating Measure 0.0015L – 0.0024L in. valve on gearshaft (0.0381L – 0.0609L mm) assembly 7 Fit of vane on housing Measure 0.0015L – 0.0025L in. (0.0381L – -0.0635L mm) 8 Fit of pin in slot Measure 0.0000 – 0.0050L in. (0.0000 – 0.1270 mm) 0019 00-23 Change 1