NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 370 of 1014
NMWR 9-2815-220 AUTOMATIC INJECTION ADVANCE ASSEMBLY OVERHAUL—Continued 0019 00 INSPECTION 1. Inspect components not covered by an OIP in accordance with WP 0005 00. 2. Refer to WP 0005 00 and the OIPs in Table 1 for specific inspection criteria for selected items. 3. Discard all mandatory replacement parts. Refer to Figure 6. Table 1. Components Requiring Overhaul Inspection. COMPONENT OIP Accessory driven gear bearing rotating eye bracket 11684059 (Table 2) (item 3, Figure 6) Accessory drive engine multiple gearshaft (item 6, 8725248 (Table 3) Figure 6) Injection advance vane housing cover (item 10, Figure 6) 10889712 (Table 4) Injection advance stationary vane (item 11, Figure 6) 7320400 (Table 5) Injection advance vane housing (item 12, Figure 6) 7320403 (Table 6) Injection pump drive spur gearshaft (item 14, Figure 6) 12254218 (Table 7) Injector driven shaftgear bearing unit housing (item 21, 8725243 (Table 8) Figure 6) Injection advance flyweight adjusting ring (item 22, 8682732 (Table 9) Figure 6) Injection advance flyweight assembly (item 23, Figure 6) 11684267 (Table 10) Injection advance flyweight fulcrum pin (item 24, 8682665 (Table 11) Figure 6) Fluid regulating valve (item 26, Figure 6) 8682731 (Table 12) Timing advance spring retainer compression helical seat 11684065 (Table 13) (item 27, Figure 6) Injection advance flyweight housing (item 29, Figure 6) 11684263 (Table 14) REPAIR ASSEMBLY 1. Refer to WP 0005 00 for general assembly procedures. 2. Assemble automatic injection advance assembly in accordance with TM 9-2815-220-34. 0019 00-2 Change 1 Refer to WP 0005 00 for general repair instructions.