NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 369 of 1014
0019 00-1 Change 1 MWR 9-2815-220 AUTOMATIC INJECTION ADVANCE ASSEMBLY OVERHAUL 0019 00 THIS WORK PACKAGE COVERS: General Instruction, Disassembly, Cleaning, Inspection, Repair, Assembly, and Testing INITIAL SETUP: Materials/Parts Materials/Parts - Continued Oil, engine (item 6, WP 0050 00) Spring (8) (item 19, WP 0052 00) Ball bearing (1) (item 272, WP 0052 00) Spring (2) (item 153, WP 0052 00) Ball bearing (1) (item 255, WP 0052 00) Washer (1) (item 415, WP 0052 00) Cotter pin (2) (item 629, WP 0052 00) Washer (2) (item 464, WP 0052 00) Cotter pin (4) (item 630, WP 0052 00) Machine bolt (6) (item 35, WP 0052 00) Tools Nonelectrical wire (V) (item 576, WP 0052 00) Tool kit, general mechanic's: automotive Nut (1) (item 713, WP 0052 00) (item 30, WP 0051 00) Nut (2) (item 451, WP 0052 00) Retaining clip (4) (item 152, WP 0052 00) References Retaining ring (1) (item 555, WP 0052 00) TM 9-2815-220-34 Retaining ring (1) (item 296 WP 0052 00) MIL-PRF-2104G Retaining ring (4) (item 427, WP 0052 00) MIL-DTL-83133E Seal (8) (item 18, WP 0052 00) WP 0005 00 Shim (1) (item 409, WP 0052 00) GENERAL INSTRUCTION This section covers overhaul of the automatic injection advance assembly. Specific instructions on disassembly, cleaning, inspection, repair, assembly, and testing are included. Wear limits, fits, tolerances, and overhaul inspection procedures (OIP’s) for individual components are also included. Mandatory replacement parts are designated by an asterisk (*) in the key to Figure 6. DISASSEMBLY Disassemble the automatic injection advance assembly in accordance with TM 9-2815-220-34. CLEANING Refer to WP 0005 00 for general cleaning instructions. N