NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 155 of 1014
NMWR 9-2815-220 GENERATOR DRIVE ASSEMBLY OVERHAUL—Continued 0009 00 Table 6. Overhaul Inspection Procedure for Gear-Slip Clutch (Model AVDS-1790-2CA) (OIP 11682722) (Item 13, Figure 5) – Continued. QA NO. REF. CHARACTERISTIC INSP. REQUISITE REQ. LTR. METHOD 5 C Dimension over Measure 4.1670 – 4.1720 in. 0.2000 in. (5.08 mm) (105.8418 – 105.9688 mm) diameter pins 6 Slip torque Measure (Refer to No excursion at 167 lb-ft (226.95 Inspection) N m) of torque and ambient 75°F (24°C) temperature 7 Deflection Measure (Refer to Must not be less than 8 degrees Inspection) nor greater than 17 degrees at 167 lb-ft (226.95 N•m) torque 8 Fit of bearing on gear Measure 0.0001T – 0.0010T in. shaft hubs (0.00257 – 0.0254T mm) C 0009 00-11