NMWR-9-2815-220 Overhaul Manual for M60 M88 Engine AVDS-1790-2CA, AVDS-1790-2DA, AVDS-1790-2DR Download
Page 146 of 1014
NMWR 9-2815-220 GENERATOR DRIVE ASSEMBLY OVERHAUL—Continued 0009 00 INSPECTION 1. Inspect components not covered by an OIP in accordance with WP 0005 00. 2. Refer to WP 0005 00 and the OIPs in Table 1 for specific inspection criteria for selected items. 3. Discard all mandatory replacement parts. Refer to Figure 5. Table 1. Components Requiring Overhaul Inspection. COMPONENT OIP Generator adapter (item 8, Figure 5) 10882773* (Table 3) Generator drive spur gearshaft (item 10, Figure 5) 8682814* (Table 4) Generator adapter mechanical housing (item 11, Figure 5) 11642079** (Table 5) Gear slip clutch (item 13, Figure 5) 11682722** (Table 6) Drive idler spur gear (item 14, Figure 5) 8682689 (Table 7) Shouldered shaft (item 18, Figure 5) 8761440 (Table 8) *(AVDS-1790-2DA and AVDS-1790-2DR) **(AVDS-1790-2CA) 4. The Model AVDS-1790-2CA gear slip clutch is inspected using the following procedure. (a) Place gear into bench fixture (Figure 1). Then place adapter onto matching base and secure with two washers and two nuts. (b) Fasten plate (Figure 1) to adapter using six bolts. BENCH FIXTURE VEE BAND CLAMP PLATE ADAPTER Figure 1. Torque Checking Fixture Assembly-Special Parts. 0009 00-2