5340-00-014-5623

DAC: 2 1 Jan 1963 5940-00-788-2699 Terminal Board A2015RNCC: 3 | RNVC: 9 | DAC: 4 1 Jan 1962 5340-00-014-5623

Autostuc NvCAGE Code: B2055NCAGE Code: B2055Status: ActiveType: Commercial Supplier CAGE B2055 Autostuc
B2055 Autostuc Nv is an Active Commercial Supplier with the Cage Code B2055.
Wahidullah Ahmadzai Ltd Frequently Asked Questions (FAQ) for CAGE B2055 What is CAGE Code B2055?

5360-13-100-4148 5360131004148 131004148 is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and spring, reinforcing, hose.

3120-00-056-2421 3120000562421 000562421 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

5310-01-554-3256 5310015543256 015543256 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.