Premium Information is available for this item - Upgrade for $1 a day
9540-00-596-3047
Structural Channel
9540005963047 005963047 AMS-QQ-A-200/3 4531 60-451 13627 S70 1M706 QQ-A-200/3 M1286 PA7008
A structural shape fabricated from a ferrous or nonferrous material and has a flange extending usually at right angles in the same direction from each edge of a web and/or resembling the letter U in cross-sectional form. View more Structural Channel
November 2023
12
Marketplace 9540-00-596-3047
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-596-3047 5+ Documents (More...)
| RNVC: 2 | DAC: 4 13 Feb 1976 3960-01-016-5097 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-596-3047
Structural Channel 9540005963047 005963047 3047Structural Channel9540005963047 005963047 AMS-QQ-A
60-451 87754 SM-A-800651-1 SAE-AMS-QQ-A-200/8 13627 760140-96 760140-70 17877 QQ-A-200/8 896161-0060
Structural Channel 9540005963047 005963047 3047Structural Channel9540005963047 005963047 AMS-QQ-A-200
BEAM,STRUCTURAL AMS-QQ-A- 2 FT AMS-QQ-A 9540013231715013231715 BEAM ,STRUCTURAL AMS-QQ-A-200/3
Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM https
3 FT NS Request Quotation BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A
AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/ https//www.nsnlookup.com
,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A-200/3
BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 ANGLE,STRUCTURAL https//www.nsnlookup.com
Restrictions 9540-00-596-3047
9540-00-596-3047 is a Structural Channel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-00-596-3047
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-596-3047
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GGGT
- Brazil (YA01)
- Effective Date:
- 1 Sep 2000
Approved Sources 9540-00-596-3047
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 4531
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Incomplete Reference
- Incomplete Reference
- 60-451
- 29321 - Transtar Metals Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 13627
- 01634 - Aluminum Co Of America (Active)
- Incomplete Reference
- Incomplete Reference
- S70
- 7EK50 - Textron Aviation Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 1M706
- 76301 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S70
- 71379 - Cessna Aircraft Company (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M1286
- 14170 - Hughes Missile Systems Co San Diego (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- PA7008
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-596-3047
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Channel
- Base Flange Thickness [AJGP]
- 0.062 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Left Flange Joins Base Flange [AJGL]
- 0.016 Inches Nominal
- Fillet Radius Where Right Flange Joins Base Flange [AJGY]
- 0.016 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.032 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.032 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- T-4 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/3, Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T4 Temper
- Left Inside Angle [CQHP]
- 90.0 Degrees Nominal
- Left Side Flange Height [ADXJ]
- 0.500 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.062 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Inside Angle [CSQD]
- 90.0 Degrees Nominal
- Right Side Flange Height [ADXK]
- 0.500 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.062 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Width [ABMK]
- 0.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.100 Pounds Per Linear Foot
DLA Procurement Analysis 9540-00-596-3047
Management Data 9540-00-596-3047
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-596-3047
Freight Information 9540-00-596-3047
9540-00-596-3047 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104850. A Sub NMFC of X. It has a NMFC Description of CHANNELS I/S NOI. 9540-00-596-3047 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54000 which rates the freight between FCL and LCL. 9540-00-596-3047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-596-3047 is not classified as a special type of cargo when transported by water. 9540-00-596-3047 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-596-3047
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-596-3047 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: