Premium Information is available for this item - Upgrade for $1 a day
9540-00-528-6878
Structural Angle
9540005286878 005286878 SAE-AMS-QQ-A-200/8 5401 60-298 10262 372 ASTM B221 AMS-STD-184 PA5545 LS3229-2 AMS-QQ-A-200/8 QQ-A-200/8
A structural shape fabricated from a ferrous or nonferrous material and resembling the letter L in cross-sectional form. The edges may have a bulb, be rounded, and the inside corner may have a fillet. View more Structural Angle
November 2023
14
Marketplace 9540-00-528-6878
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-528-6878 5+ Documents (More...)
-T6511 AMS-STD-184QQ-A-200/8 ASTM B221 AMS-QQ-A-200/8 A a day Upgrade your Account Upgrade 9540-00-
528-6878Structural Angle9540005286878 005286878 SAE-AMS-QQ-A-200/8 day Upgrade your Account Upgrade 9540
Bar 9530014318798 014318798,AMS 4173 AMS-STD-184QQ-A-200/8QQ-A-200/8-T6511,0.500X1.750X144 SAE-AMS-QQ-A-200/8
Angle9540005286878 005286878 SAE-AMS-QQ-A-200/8 5401 60-298 10262 372 ASTM B221AMS-STD-184 PA5545 LS3229
ASTM B221 QQA200-8 AMS-QQ-A-200/8 A structural shape fabricated from a ferrous fabricated from
-T6 AMS-QQ-A-200/8 ASTM B221 A structural shape /8 A structural shape fabricated from a ferrous
AMS-STD-184 AMS-QQ-A-200/8 ALLOY 6061 TMPR T NAS 345-60 60-5009 QQ-A-200/8 AMS-QQ-A-200/8 A structural
ALLOY 6061 TMPR T NAS 345 Angle9540001979861 001979861 734RR SAE-AMS-QQ-A-200/8 https//www.nsnlookup.com
AMS4150 QQ-A-200/8 AMS-QQ-A-200/8 AMS10133-1203 ASTM B221 AND10133-1203 A structural shape fabricated
a day Upgrade your Account Upgrade 9540-00-197-9842Structural Angle9540001979842 001979842 SAE-AMS-QQ-A-200/8
Restrictions 9540-00-528-6878
9540-00-528-6878 is a Structural Angle that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-528-6878
- US Coast Guard (C918)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- C003
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GG
Approved Sources 9540-00-528-6878
- Part Number
- Manufacturer
- Status
- SAE-AMS-QQ-A-200/8
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 5401
- 01634 - Aluminum Co Of America (Active)
- Primary Buy
- Primary Buy
- AMS-STD-184
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 60-298
- 29321 - Transtar Metals Corp (Active)
- Secondary Buy
- Secondary Buy
- 10262
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Secondary Buy
- Secondary Buy
- 372
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Secondary Buy
- Secondary Buy
- ASTM B221
- 81346 - American Society For Testing And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-STD-184
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- PA5545
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- LS3229-2
- 98897 - Lockheed Martin Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/8
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/8
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/8
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-528-6878
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Angle
- Base Flange Thickness [AJGP]
- 0.062 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Left Flange Joins Base Flange [AJGL]
- 0.062 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/8, Alloy 6061
- Nondefinitive Spec/Std Data [ZZZT]
- 6061 Alloy And T6 Temper
- Left Inside Angle [CQHP]
- 90.0 Degrees Nominal
- Left Side Flange Thickness [ADXL]
- 0.062 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 0.750 Inches Nominal
- Overall Width [ABMK]
- 0.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.110 Pounds Per Linear Foot
DLA Procurement Analysis 9540-00-528-6878
Management Data 9540-00-528-6878
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-528-6878
Freight Information 9540-00-528-6878
9540-00-528-6878 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013140. A Sub NMFC of X. It has a NMFC Description of ALUMINUM ANGLES. 9540-00-528-6878 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05390 which rates the freight between FCL and LCL. 9540-00-528-6878 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-528-6878 is not classified as a special type of cargo when transported by water. 9540-00-528-6878 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-528-6878
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-528-6878 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: