Premium Information is available for this item - Upgrade for $1 a day
9540-00-261-5614
Structural Beam
9540002615614 002615614 AMS-QQ-A-200/11 AMS10136-2002 HT193 7304 14663 AND10136-2002 2397636 QQ-A-200/11 S1330635 40305
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
24
Marketplace 9540-00-261-5614
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-261-5614 5+ Documents (More...)
AND10136-2002 S1330635 K40A1000 7304 14663 40305 QQ-A-200/3 A structural shape fabricated from a ferrous
Request a Quotation from participating marketplace vendors Request Global Test Supply 7304 Greenlee 7304
AND10136-2002 S1330635 K40A1000 7304 14663 40305 QQ-A-200/3 A structural shape fabricated AMS-QQ-A-200
/3 BEAM,STRUCTURAL 2 FT NS Request Quotation Subscribe to View Vendor Details... 7304 BEAM QQ-A200/3
Request a Quotation from participating marketplace vendors Request Global Test Supply 7304 Greenlee 7304
AND10136-2002 S1330635 K40A1000 73041466340305QQ-A-200/3 A structural shape fabricated AMS-QQ-A
AND10136-2002 BEAM,STRUCTURAL 696 FT NS Request Quotation FedMall Updated Every 15 Minutes 9540-01-562
AND10136-2002 BEAM,STRUCTURAL 696 FT NS Request Quotation AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS
55 EA NS Request Quotation Subscribe to View Vendor Details... 7304 BEAM,STRUCTURAL 193 EA NS Request
Quotation Subscribe to View Vendor Details... 7304 BEAM,STRUCTURAL 99 EA NS Request Quotation Subscribe
Restrictions 9540-00-261-5614
9540-00-261-5614 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-00-261-5614
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-261-5614
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- Supplementary Receivers:
- CT
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Spain (YB01)
- Effective Date:
- 1 Nov 2007
- Argentina (YF01)
- Effective Date:
- 1 Aug 2015
- Australia (ZA01)
- Effective Date:
- 1 Nov 1994
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Jan 1997
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 9540-00-261-5614
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS10136-2002
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- HT193
- 10383 - Kaiser Aluminum And Chemical Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 7304
- 01484 - Reynolds Metals Co (Obsolete)
- Incomplete Reference
- Incomplete Reference
- 14663
- 27610 - International Light Metals Corp Sub (Obsolete)
- Incomplete Reference
- Incomplete Reference
- AND10136-2002
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 2397636
- 88277 - The Boeing Company (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- S1330635
- 88277 - The Boeing Company (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQ-A-200/11
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2397636
- 18355 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S1330635
- 18355 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS10136-2002
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 40305
- 99267 - Bohn Aluminum And Brass Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-261-5614
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.000 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.094 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.000 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.000 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.330 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.047 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
- Top Flange Width [BQJG]
- 2.000 Inches Nominal
Weapon Systems (WSDC) 9540-00-261-5614
DLA Procurement Analysis 9540-00-261-5614
- Last Stock Position:
- 203 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-261-5614
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-261-5614
Freight Information 9540-00-261-5614
9540-00-261-5614 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-261-5614 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-261-5614 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-261-5614 is not classified as a special type of cargo when transported by water. 9540-00-261-5614 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-261-5614
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-00-261-5614 4 Records
Contracting Technical Data File (CTDF) 9540-00-261-5614 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: