Premium Information is available for this item - Upgrade for $1 a day
9535-01-063-5185
Laminated Shim Stock
9535010635185 010635185 BAC1534-125
A ferrous or nonferrous product of rectangular cross section uniform throughout. It is composed of thin layers of foil alternating with layers of adhesive binder to form a unit structure which can be reduced in thickness by peeling off one or more layers. It may be laminated or partly solid and partly laminated. All laminations must be of the same thickness. View more Laminated Shim Stock
Managed by United States
NSN Created on 8 Aug 1978
Data Last Changed
November 2023
November 2023
NATO Update Count
12
12
NATO Data Quality
Marketplace 9535-01-063-5185
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 9535-01-063-5185 5+ Documents (More...)
Documents 9535-01-653-1388 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-95/fsc-9535/us 9535-01-063-5185
Laminated Shim Stock 9535010635185 010635185 Documents 9535-01-063-5185 5+ Documents ( More...
Laminated Shim Stock 9535010635185 010635185 Documents 9535-01-063-5185 5+ Documents ( More...
Bac1534-125F Manufacturers StandardStyle Designator [STYL]RectangularSupplementary Features [SUPP]Bac1534-125
Is A Raw Stock (Make From) Part Number Assigned To Nsn 9535-01-063-5185/Shim Stock, Laminated Subscribe
Is A Raw Stock (Make From) Part Number Assigned To Nsn 9535-01-063-5185/Shim Stock, Laminated Subscribe
5365-01-683-6477 5365016836477 016836477 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Make From Bac1534-125.
5365-01-652-6041 5365016526041 016526041 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.
Restrictions 9535-01-063-5185
9535-01-063-5185 is a Laminated Shim Stock that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9535-01-063-5185
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GGGT
Approved Sources 9535-01-063-5185
- Part Number
- Manufacturer
- Status
- BAC1534-125
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 9535-01-063-5185
- Characteristic
- Specifications
- Basic Shape Style [AGTA]
- Specifications
- Solid
- Cross-Sectional Thickness [ADVM]
- 0.1250 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-250/1 Fed Spec 1St Material Response And Qq-A-250/8 Fed Spec 2Nd Material Response And Qq-A-250/5 Fed Spec 4Th Material Response
- Material [MATT]
- Aluminum Alloy 1100 Or Aluminum Alloy 5052 Or Aluminum Alloy, 1145, American National Standards And Aluminum Alloy 2024
- Lamination Construction In Percent [BRDW]
- 41.6
- Lamination Quantity [BRDX]
- 21
- Lamination Thickness [BRDY]
- 0.003 Inches Nominal
- Length [ABRY]
- 48.000 Inches Nominal
- Special Features [FEAT]
- Temper T3 Or T4 For Solid Stock
- Weight Per Unit Measure [BRFD]
- 3.600 Pounds Per Square Foot
- Width [ABGL]
- 24.000 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81205-Bac1534 Manufacturers Standard
Weapon Systems (WSDC) 9535-01-063-5185
DLA Procurement Analysis 9535-01-063-5185
Management Data 9535-01-063-5185
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9535-01-063-5185
9515-15-195-5950 9515-14-560-6783 9535-37-505-9534 9535-12-306-3562 9535-14-288-3437 9535-99-404-1922 9515-14-529-5542 9535-14-576-7356 9515-14-462-6973 9515-14-482-8434 9515-14-464-8230 9515-14-560-7821 9515-14-524-4841 9535-14-573-8231 9515-14-557-0700 9515-14-577-4029 9515-99-793-2423 9515-14-465-3192
Freight Information 9535-01-063-5185
9535-01-063-5185 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013560. A Sub NMFC of Z. It has a NMFC Description of ALUM PLATE R SHEET. 9535-01-063-5185 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05690 which rates the freight between FCL and LCL. 9535-01-063-5185 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9535-01-063-5185 is not classified as a special type of cargo when transported by water. 9535-01-063-5185 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9535-01-063-5185
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9535-01-063-5185 1 Records
Contracting Technical Data File (CTDF) 9535-01-063-5185 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: