9515-01-532-1360

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Armor Plate (INC 30873) DAC: 1 7 Jul 2005 9515-01-532-1360

2005 9515-01-531-4025 Armor Plate 2004A1009RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: 1 7 Jul 2005 9515-01-532-1360

5999-01-426-5293 5999014265293 014265293 is an item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. excludes items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. see also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

3040-14-426-5293 3040144265293 144265293 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

3040-00-426-5293 3040004265293 004265293 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.