5310-37-518-5100
Flat Washer
5310375185100 375185100 20037-543
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-37-518-5100
Request a Quotation from participating marketplace vendors
Related Documents 5310-37-518-5100 5+ Documents (More...)
Flat Washer 5310375185100 375185100,20037-543 5310997104793 997104793 373-6997 5310-12-336-6867
373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
Geluidsignaalon Kop 1360176086024 176086024 5268-3 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
Restrictions 5310-37-518-5100
End Users 5310-37-518-5100
- Republic of Korea (ZH)
Approved Sources 5310-37-518-5100
- Part Number
- Manufacturer
- Status
- 20037-543
- Manufacturer
- 0851F - Kia Corporation (Active)
- Secondary Buy
- Secondary Buy
- 20037-543
- S3465 - Bae Systems Hagglunds Ab (Replaced)
- Secondary Buy
- Secondary Buy