5120-25-100-0914

9515-33-106-8771 9515331068771 331068771 is a ferrous or nonferrous product of solid rectangular cross section uniform throughout. it is made to specific strength for the purpose of arresting firearm projectiles or fragments.

-0913 Vehicular Body Panel 5120-25-109-0329 Free Wheel Coupling 5120-25-101-3462 Armor Plate 5120-25-100-0914

5340-33-108-1938 5340331081938 331081938 is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. includes straight flexible items. for items specifically designed to clamp a hose to a connection to prevent leakage, see clamp, hose. see also hanger, pipe and clip, spring tension. for retaining straps with a bridge, see strap, retaining. excludes clamp, electrical; band, retaining; clamp (1), c; bracket pipe.

4710-33-200-9814 4710332009814 332009814 is a straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in tables 1 through 10, appendix c, fiig a004a. it is designed to convey fluids, gasses, and/or semisolids. it may be rolled into coils for ease in handling. for items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see adapter (as modified); coupling (as modified); or nipple (as modified). excludes tube, bent (as modified); pipe, metallic; spacer, sleeve; metal bar (hollow); and items with fittings, except end protectors.

5310-33-201-8045 5310332018045 332018045 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.