4240-66-150-1684
Industrial Spectacles
4240661501684 661501684 03396590
Spectacles designed for protection against impact and/or light radiation. Does not include spectacles having corrective lenses. View more Industrial Spectacles
Managed by Australia
NSN Created on 15 Apr 2003
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4240-66-150-1684
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4240-66-150-1684 5+ Documents (More...)
https//www.nsnlookup.com
/fsg-59/fsc-5945/us
/fsg-59/fsc-5945/us
5945-01-473-6446 Electromagnetic Actuator 5945014736446
| RNVC: 2 | DAC: E 12 Apr 2000 5945-01-473-6446 https//www.nsnlookup.com /fsg-42/fsc-4240/au 4240-66-150-1684
Industrial Spectacles 4240661501684 661501684 4240-66-150-1684 4240661501684 661501684 is spectacles
Industrial Spectacles 4240661501684 661501684 4240-66-150-1684 4240661501684 661501684 is spectacles
4240-27-052-7815 4240270527815 270527815 is spectacles designed for protection against impact and/or light radiation. does not include spectacles having corrective lenses.
https//www.nsnlookup.com
/fsg-66/fsc-6615/us
/fsg-66/fsc-6615/us
6615-01-684-1324 Rate Gyroscope 6615016841324 016841324
6615-01-684-1324 6615016841324 016841324 is a gyroscope which senses, measures, and transmits rate of angular displacement data. see also sensor,angular rate.
6615-01-684-6399 6615016846399 016846399 is a gyroscope which senses, measures and transmits angular displacement data.
5310-66-150-1578 5310661501578 661501578 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 4240-66-150-1684
End Users 4240-66-150-1684
- Australia (ZA)
Approved Sources 4240-66-150-1684
- Part Number
- Manufacturer
- Status
- 03396590
- Manufacturer
- ZR910 - J Blackwood & Son Ltd (Replaced)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 4240-66-150-1684
4240-98-108-2978 4240-98-108-2976 4240-22-602-3896 4240-27-043-8905 4240-14-442-7125 4240-12-366-0918 4240-21-908-1192 4240-21-864-7918 4240-21-893-0431 4240-21-893-0153 4240-66-098-8938 4240-66-150-1699 4240-21-864-8753 4240-27-022-2981 4240-15-156-6242 4240-12-362-0432 4240-66-150-1670 4240-21-860-0998